- 110° horizontal dispersion
- True cylindrical wavefront
- 2 x 8" mid drivers with phase device
- 2 x 8" horn loaded low frequency drivers
- 2 x 1.4’’ compression drivers
- Rigging angle pre selected before you lift the enclosures
- Ground stackable
Two way active, three-way line array module
The Arcline 8 is versatile, portable and intuitive to use. This is made possible by a host of new technologies that dramatically improve the perceived sound quality and definition. An all new advanced rigging system also reduces setup time and obviates the need for more than one person to rig multiple enclosures.
The Arcline 8 delivers a true 110 degree dispersion and results in a highly uniform polar pattern that allows all of the audience members to experience uniform sound quality across the entire sound field. Traditional high frequency driver spacing and path length compensation among line source enclosures has almost always meant a compromise in high frequency performance, so a new design of high frequency horn was developed
for the Arcline 8. Extensive FEA modelling was used both to evaluate and optimise the waveguide. A new phase shading device has also been implemented to allow multiple Arcline 8 enclosures to form a true cylindrical wavefront by splitting two acoustic sources into four, with the acoustic centre positioned optimally for coupling in both the horizontal and vertical planes.
The lightweight 15mm (5/8”) birch plywood enclosure is finished in a textured TourCoat polyurea finish, and features a unique flying system that allows rigging angles to be pre-selected before the flying the system. Two Neutrik speakON™ NL4 connectors provide input and link through connections.
3 dB down: 113 Hz to 14.5 kHz | 6 dB down: 107 Hz to 14.8 kHz
LF: 97 dB (100 dB referenced to 1 W) | MF/HF: 103 dB (106 dB referenced to 1 W)
2 x 16 Ohms
LF : 500 Watts RMS | MF / HF : 500 Watts RMS
110°H x 12°V
Continuous: 128 dB | Peak: 145dB
2 x 1.4’’ compression drivers
2 x 8’’ mid drivers with phase device , 2 x 8’’ horn loaded low frequency drivers
2 x 4-pole speakON™ NL4
15mm multi-laminate plywood
Rigging angle pre selected before you lift the enclosures
A4 Stainless Steel
Perforated steel with foam filter
Specifications and appearance are subject to change without notice.
The following high resolution images are available for download